sawmill specifications

"The Rolls Royce of Swing Blade Portable Sawmills"

Sawmill Introduction
more information
Special Features
sawmill specifications
about us
Ordering Information
contact us
video request
photo gallery































The Brand X Sawmill is a working, heavy-duty system and utilizes only quality components.  The primary component materials are: 
bulletTrack is 2" x 3" x 3/8" thick welded to 4" x 4" x 1/4" wall square tubes with 3" x 5" I beam log/cross rails.
bulletMill trucks are 4" x 4" x 1/4" angle with 1 1/2" schedule 80 pipe standards for was carriage and roof.
bulletMill truck to mill track wheels are 1 1/2" wide x 4" diameter industrial plastic with double ball axle bearings.
bulletSaw carriage is 2" x 3" x 1/8" wall rectangular tubing.
bulletGear box, saw mandrel and engine mounts fixture is 1" x 2" x 1/8" rectangular tubing.
bulletGearbox is a 1.35 to 1 reduction spiral bevel gear, cast iron (not aluminum) box with hardened gear teeth.
bulletSaw mandrel bottom mount is a precision high speed taper log ball bearing with cast iron case.
bulletBelts are industrial B pattern V belts.
bulletClutch is a Noram machined steel with bonded shoes, 1000-rpm engagement, centrifugal clutch.
bulletDriven sheave is a 2B50 machined/balanced cast iron sheave.

All engines have both electric an manual starting as standard equipment. 


Sawmill Specifications

Mill track:  78" wide to infinite length.

Power Options:  From 16 to 20 HP using electric start Briggs and Stratton, Koehler or Honda Engines.

Power Transfer:  3-shoe centrifugal Noram clutch, B 37-38 industrial v belts, Curtis gray iron gear case with hardened gears, and 4140 steel saw mandrel (machined from one piece of solid stock).

Cutting Capacities:  From 3" to 36"  plus diameter by as long as nature grows straight trees.  8 1/2" x 17" timber without turning the log or reconfiguring the mill.

Basic Mill Package includes:

bullet31' of track for sawing 22'6" long logs
bulletnew electric start (with manual start) V twin 16 HP Briggs and Stratton engine with new battery
bullet(3) 21 1/2" carbide tipped saws
bulletelectric sharpener with diamond stone
bulletcoolant jug with valve, tubing and nozzle
bulletlap siding attachment
bulletPeltor safety helmet with full face shield and ear protection
bulletMill orientation and operation, sawing technique, adjustments, sharpening and mill care and maintenance, safety hazards identification and accident prevention school


Warranty:  2 year defect in materials and workmanship.  The engines are warranted by the manufacturer.

Interested in pricing?  Click here


Link to Glacier Creek Logging and Lumber's Log Siding and Related Wood Products page.